Відео

Are you on NG++?

Are you using it for the first time? Hope you’ve closed the jar before pressing the button because it won’t if the blades are exposed.

Hi, this procedure is standard and works on all cars. Just check where the evaporator drain pipe on your car is. It would most likely be in front of the firewall. If you turn on the AC for some time, you’ll see the water dripping below your car. The spot above that is where rhetorical evaporator drain pipe is situated.

Hi Priyan, please don’t do that. The 90/100W bulbs draws higher current and your stock wiring is not capable of handling it and it will invariably melt, causing overheating, short circuiting and possibly a fire later. Buy a relay wiring harness and change the bulbs.

@@GaneshBalan Thanks for an information sir.!

Hi Vetrivel, the cordless screwdriver is working well. I’ve used it for several applications and have put it for charging exactly once. I only wish it had a variable speed option. 🙂

Mr Pasha, I am not a dealer or a shop owner. I am only a regular Polo owner and now an ex-owner since I sold my Polo. My number is 90996 91369.

To be very honest, when it worked, it worked well. It was only this really L-O-N-G downtime of 2 weeks that was frustrating. And Airtel’s customer support - the less said the better.

@@GaneshBalan I spoke to a supervisor 6 times and their chat option on the Airtel app is worthless ... I've decided to switch connections once my 6 months is over.

A lot of firms have switched to IVRs and reaching out to a human is nigh impossible today man! I can understand your pain. Review the situation after 6 months and take a call. I’m not touching Airtel with a barge pole again! I’ve had enough.

A separate modem to which the optical fibre cable was connected to and a LAN cable from the modem to the WiFi router.

@@GaneshBalan now airtel have an all in one modem.

Good to hear! Irrespective of how many devices they have, I only hope their connection is good and customers don’t face extended downtimes. 🙏🏻

Can understand your predicament Sourav. If it’s getting too much, just switch to an alternate ISP after checking around your neighbourhood.

Hi, the heater is part of the coolant system. When the engine achieves operating temperature and the coolant temperature reaches approx 90’C, if you turn on the heater of the HVAC system, the hot coolant circulates through the vents.

Good suggestion Trevor - I’ve also brought this out in my video wherein I’ve mentioned to avoid any kinks in the hose during operation. These bends or kinks will lead to the hose getting ruptured at that point.

I’m not going to forget this one for a long time! 2 weeks without internet man. 😖 I don’t expect any favours from Jio - just a downtime-free service. 🙏🏻

Спасибо за отзыв Людмила.

Hi, I don’t experience any shortage in the range since my 1 BHK apartment is quite small at 600 sqft. The other option is to place it quite high up where my son won’t be able to reach it but the power and optical cables can be quite an eyesore! This one works just fine for me. 👍🏻 There may be issues if it’s a 2 storey home and you may need a range extender.

Please use an extension from a 16A socket. Don’t use a 6A socket and convert it to a 16A one simply because it is not meant to take higher loads. At best 600-800W max. Like a mixer grinder.

Thankyou Ganesh. Grateful for the prompt response. Regards

Yes there are 2 different types of brake callipers sets for the Polo. Yours is a Polo from one of the earlier batches I presume? The one which has FS III inscribed on the calliper assembly?

@@GaneshBalan correct, I just ordered a 7MM bit to put on my wrench as it’s very stuck so I can put down enough force to get it to come out.

What is stuck? The brake disc Torx screw?

@@GaneshBalan no the two screws that keep the caliper on the caliper holder 😅

@vekkuTV Got it. But remember to have a longer pipe over the wrench for the additional leverage.

There will be negligible mileage difference between the two variants.

@@GaneshBalan TQ SIR

Hi Nivedh, hope you’ve got your sharkfin radio aerial sorted by now. 🙂

Please contact Subros through their mail ID given in their website. I am an owner of Zen LX just like you. I don’t own a workshop.

@@GaneshBalan thank you sir

Please contact Subros customer support by mail.

Hi Deepu, please go ahead and change them if they’re old and leaking. You can stick to the OE ones from Maruti or from Monroe, Shaeffler or Gabriel.

@@GaneshBalan thankyou

Thank you for the feedback Ravi. 😊

Honda hasn’t indicated the wattage on the stock speakers. I would hazard a guess - 20W max, going by the wattage on the standard stock speakers with tiny magnets. Hyundai’s Bose and Tata’s Harman units have higher wattage like 35W. For your use case, I’d recommend a set of any of these coaxials: 1. Kenwood KFC-1666S 2. Infinity 6520F 3. Sony XS-FB162E They can be driven just fine with the stock unit. Larger wattage units like the Morels, Polks, etc require an amp. to be properly driven.

Sudarshan, you’re spot on man. I wasn’t able to remove the oil filter from a colleague’s Swift petrol. It remained stuck there. He had to get it undone from a garage who ended up calling someone from Maruti’s service centre! They had to puncture the filter and then remove it. Chawri Bazar and Kashmere Gate in Delhi eh? Noted. Next time instead of visiting the usual Nehru Place for computer parts and Palika Bazar, I’ll visit these then. 🙂👍🏻

Hi Ranjith, Maruti has stopped the production for most spares for the Zen. You will have to approach an MGP outlet and check if they have stock of the spares. Ask around.

Components are better than coaxials if paired with a good amp. If you’re driving the speakers with just the head unit, coaxials would be better. There is a noticeable difference between aftermarket components/ coaxials compared to Honda’s stock speakers. I would recommend using a good amp to bring the best out of these speakers.

Thank you for the feedback! Appreciate it. 😊

Thanks a lot for the feedback Preshak. Appreciate it bro. 🙂

Hi Vandana, as I mentioned in the video, this was a gift to the women colleagues of our company. So I don’t have the link. You can check Amazon for ‘portable blender’.

No. Not recognised in Hindi.

Tough luck man. Next playthrough now.

Do you have any issues with the current firmware? Do you have Android Auto or CarPlay in your system?

@@GaneshBalan It Is Not Having Apple Car And Android Auto. I Want It..

Send me email ID. Will share the update through Dropbox. Download and install.

@@GaneshBalan Bro, I Cant Send Email Here, It's Not Going...

Mention like this - abc . def at gmail dot com

Have you not installed a CANBUS decoder for your system? There’s a small box which decodes CANBUS signals. You can use the steering controls with that. Check with your local car accessory shop.

It’s in T Nagar.

It is quite random dude. Good thing is you’ve a bonfire just around the corner so you can quickly run spawn and run.

What about the BCM? You will have to get it installed at a place who knows what they are doing. The immobiliser data has to be read from the stock cluster and coded into the new cluster.

Haha so true. The HP is significantly higher for NG+ but the trick works. Did you manage to kill it?

Hi Deepak. Thank you so much for the kind words. 😊

I had installed cruise control on my Polo so ended up changing the combi switch.

Have you checked the fuse? Did you use fog lamp’s wiring for tapping into any other light? This DIY does not touch the fog lamp wiring.

No. Android Auto and CarPlay doesn’t permit watching UA-cam as it is a safety concern.

Speak to someone from Subros. They’ll have a regional contact for customer service and can help you out.

😊

Tony, thanks a lot for your feedback man. Appreciate it. 🙂

@@GaneshBalan no worries,like I said you done a great job.

The unit won’t work when it is charging - it is a safety feature. Disconnect the charging cable and try.

Heyy did yours work ??